I was recently asked to give my professional opinion of one of a range of developers made by a company called Spürsinn. These are well known in Germany where they are produced, but I had not heard of them. Looking at the accompanying literature for the two bath developer I had been sent, known as HCD-S and HCD-2, I could see that they had done extensive testing. There were development times and detailed dilutions for 38 films and some of those had a long list of possible ratings and dilutions, -for instance there were 22 for Efke 50 alone.
They claim good results rating many of the films at a wide range of ISO settings. HP5 for instance can be rated between 25 and 25600 ISO. They also claim that these developers have excellent edge sharpness, good tonality and low chemical fog at all ratings. AND they have excellent keeping properties. My first thoughts were that these were amazing and possibly exaggerated claims, so I began my tests hoping to be astounded, -but at the same time prepared for a disappointed thump of reality. These developers couldn’t be as good as they claim, could they? I needed to find out for myself.
I began my tests with the best film in the Ilford stable for sharpness and fine grain: Delta 100 and I shot 35mm because I wanted to use maximum enlargement to evaluate the quality. The first couple of films were very dense and I thought I had done something wrong. I checked my times and dilutions, shot another couple of test films, and after processing found exactly the same results. I contacted Spürsinn and they were extremely helpful, they looked into it and let me know pretty quickly that I had been working to a misprint (which apparently, 500 previous customers had not noticed!), and they supplied me with corrected time/dilutions, which worked better. The test prints from some of these negatives looked very crisp and the mid tones were punchy –what some refer to as micro-contrast and I found that the crisp detail that this developer produced showed one of my lenses to be not as sharp as I had previously thought!
I set about processing a few other films that I had in my darkroom. Next was FP4, this too turned out with punchy tonality, -ideal for low contrast subjects, but perhaps a bit too punchy for scenes of high contrast, or overexposed frames. This punchy quality is great for showing texture in low contrast subjects, like the mid to dark areas of a scene where you have similar shades, for instance: in weathered wood , like this old block.
Having processed a few films with the HCD-S / HCD-2 combination, I can see that these developers do produce clean shadow areas and enhanced sharpness, but with the enhanced grain that this micro contrast brings. Personally, I think this is a nice quality in 35mm photographs and one of the reasons why I shoot 35mm. In medium format negatives the grain would be much less noticeable and with even greater sharpness, so that is probably where this developer would really come into its own. I don’t know if you can see from this crop of the 35mm image above, but the detail is very good.
Density and contrast.
I am of the belief that what is considered correct tonality in a monochrome print is not absolute, but varies from region to region. In Eastern Europe for example, there seems to be a preference for higher contrast in their images. I think that this developer is designed for that kind of approach, but for the British photographer who, I think prefers a longer, smoother tonal range, it might be a little harsh. If you are getting negatives which are of a higher contrast than you are used to, the normal technique is to reduce the development time by 20%. If your negatives are still of a higher contrast than you would prefer, try a reduction of 25%. The instructions for the two bath process here, should, if it were a conventional two bath, need adjusting only in the second bath, but the instructions say to alter both. What they recommend is that you alter your dilution (both baths) but keep the time the same. So calculating 20% off a 1-24 dilution gives roughly 1-30.
Reducing the time should bring the density in the highlights down, with very little effect on shadow detail and would produce a negative with the same sharpness, but with a longer tonal range. I put my theory to the ever helpful Michael Weyl at Spursinn and he was interested in the idea, suggesting that he is going to start work on finding different dilutions for ‘British’ tastes soon.
When I printed from the Delta 100, Delta 400 and FP4 negatives I had processed for this test and review, I found the contrast was requiring pre flash and split grade printing to get a full range out of the negative. The FP4 being the most dense. I then calculated a new dilution with a reduction of 18%, keeping all other factors unaltered. The results were much better, but they were still more dense than the sort of negatives I am used to. The next test will be with a greater reduction.
It is important to note that this developer, and the others that Spurrsin make, are quite sensitive to dilution and agitation, so once you have established the correct time and dilution for your tastes, good processing technique is important. Working with a quality developer like this requires accuracy in exposure readings, focus and careful control of measurement/dilution/temperature and agitation in processing. Variations in local water hardness can have an effect on outcome, but methods to get around this are explained clearly in the extensive instructions. To reduce the possibility of this happening I would suggest using de-ionised water to make up your developers.
I have not had time to test a lot of films in this developer, but I shall continue to experiment with it. With the huge range of ISO ratings for so many films, there are possibilities for some quite interesting styles of photography. From (I would expect, but I’ve not tested yet) Ilford Pan F rated at 320 ISO for high contrast effects, through to Ilford HP5 rated at 25 ISO for a long, smooth tonal range. I am also interested to see if Ilford Delta 3200 rated at ISO 12800 will produce an exaggerated grain effect. I will be testing these ideas soon and will post my findings here when I have my results.
A friend of mine, Bruce Robbins writes a blog on film based photography which is very informative and has tested the Acurol-N developer from Spur. He can be found at: http://www.theonlinedarkroom.com
Currently, The Spursinn developers can be bought from:
Keyphoto – http://www.keyphoto.com/latest-news.html?article=109
MacoDirect – http://www.macodirect.de/spur-acurol-250ml-p-2510.html?language=en&osCsid=782e362bc991eab30a270f24c72cd642 ,
Photoimpex – http://www.fotoimpex.de/shopen/chemistry/spur-acurol-n-250ml.html
and Spurrsin themselves in Europe – http://www.spuersinn-shop.de/index.php?page=product&info=681
3 Comments
Posted 05/07/2013 at 2:53 pm
Looks like something worth trying I must say
- Thomas Binsfeld
Posted 05/03/2014 at 2:42 pm
In the past I have tested several negative developers and always returned to ID-11 which I use since 35 years and know best. (Which is in opinion the most important thing in using negative developers.)
Regards,
Thomas
2. Andrew Sanderson
Posted 06/03/2014 at 11:36 pm
Dear Thomas, I think I am beginning to come to the same conclusion. I was trying out some other developers last week (Pyrocat, Microphen, Ilfotec DD-X) and my results were not consistent.
Thewebdarkroom 